PEPPLER.ORG
Michael Peppler
Sybase Consulting
Menu
Home
Sybase on Linux
Install Guide for Sybase on Linux
General Sybase Resources
General Perl Resources
Freeware
Sybperl
Sybase::Simple
DBD::Sybase
BCP Tool
Bug Tracker
Mailing List Archive
Downloads Directory
FAQs
Sybase on Linux FAQ
Sybperl FAQ
Personal
Michael Peppler's resume

sybperl-l Archive

Up    Prev    Next    

From: michael dot peppler at bnpparibas dot com
Subject: Re: sybperl 'make test' problem
Date: Aug 31 2006 1:28PM

Try to run
      perl -Mblib t/1_db_dblib.t
by itself to see where it gets to, and to try to figure out where it
hangs...

Michael




Internet
bccraft@uci.edu@peppler.org - 31/08/2006 00:52


Sent by:    owner-sybperl-l@peppler.org

To:    sybperl-l

cc:


Subject:    sybperl 'make test' problem


Trying to upgrade to sybperl 2.18 (from 2.17) after an ASE upgrade to
12.5.4
(from 12.5.3a).  This is on Solaris 9 using the 64 bit version of ASE.
However,
the sybperl compile should be 32 bit.  The open client libraries are 12.5.1
and
are the ones distributed with the ASE install.

Edit CONFIG by changing the SYBASE line and EXTRA_LIBS line
(EXTRA_LIBS=-ltli
-lnsl -ldl -lm), also added -DNOBLK to the EXTRA_DEFS line.

perl Makefile
gmake
gmake test

I get the following output from 'gmake test' -

gmake[1]: Entering directory `/tmp/sybperl-2.18/BCP'
gmake[1]: Leaving directory `/tmp/sybperl-2.18/BCP'
gmake[1]: Entering directory `/tmp/sybperl-2.18/BLK'
gmake[1]: Leaving directory `/tmp/sybperl-2.18/BLK'
gmake[1]: Entering directory `/tmp/sybperl-2.18/CTlib'
gmake[1]: Leaving directory `/tmp/sybperl-2.18/CTlib'
gmake[1]: Entering directory `/tmp/sybperl-2.18/DBlib'
gmake[1]: Leaving directory `/tmp/sybperl-2.18/DBlib'
gmake[1]: Entering directory `/tmp/sybperl-2.18/Sybperl'
gmake[1]: Leaving directory `/tmp/sybperl-2.18/Sybperl'
PERL_DL_NONLAZY=1 /usr/local/bin/perl -Iblib/arch -Iblib/lib
-I/usr/local/lib/perl5/5.6.1/sun4-solaris -I/usr/local/lib/perl5/5.6.1 -e
'use
Test::Harness qw(&runtests $verbose); $verbose=0; runtests @ARGV;' t/*.t
t/1_db_dblib...........


and it stops and never comes back.  I do an sp__who in ASE and I see the
  login.
  I have to hit control-C to end things.  Any ideas on what I can look at
  to
troubleshoot?  Thanks

bc

Here is the output from the compile -

(thea) root:/tmp/sybperl-2.18 # perl Makefile.PL
/adcom/ase-12.5.x
Sybase OpenClient 12.5.1 found.
The sybperl modules need access to a Sybase server to run the tests.
To clear an entry please enter 'undef'
Sybase server to use (default: SYBASE):
User ID to log in to Sybase (default: sa):
Password (default: undef): XXXXXXX
Sybase database to use on SYBASE (default: undef): pubs2

* Writing login information, including password, to file PWD.

Checking if your kit is complete...
Looks good
/adcom/ase-12.5.x
Sybase OpenClient 12.5.1 found.
Writing Makefile for Sybase::BCP
Writing Makefile for Sybase::BLK
/adcom/ase-12.5.x
Sybase OpenClient 12.5.1 found.
Note (probably harmless): No library found for -lblk
Writing Makefile for Sybase::CTlib
/adcom/ase-12.5.x
Sybase OpenClient 12.5.1 found.
Writing Makefile for Sybase::DBlib
/adcom/ase-12.5.x
Sybase OpenClient 12.5.1 found.
Writing Makefile for Sybase::Sybperl
Writing Makefile for Sybase

(thea) root:/tmp/sybperl-2.18 # gmake
cp lib/sybutil.pl blib/lib/sybutil.pl
cp lib/sybperl.pl blib/lib/sybperl.pl
cp lib/ctutil.pl blib/lib/ctutil.pl
cp lib/sql.pl blib/lib/sql.pl
gmake[1]: Entering directory `/tmp/sybperl-2.18/BCP'
cp BCP.pm ../blib/lib/Sybase/BCP.pm
Manifying ../blib/man3/Sybase::BCP.3
gmake[1]: Leaving directory `/tmp/sybperl-2.18/BCP'
gmake[1]: Entering directory `/tmp/sybperl-2.18/BLK'
cp BLK.pm ../blib/lib/Sybase/BLK.pm
Manifying ../blib/man3/Sybase::BLK.3
gmake[1]: Leaving directory `/tmp/sybperl-2.18/BLK'
gmake[1]: Entering directory `/tmp/sybperl-2.18/CTlib'
cp CTlib.pm ../blib/lib/Sybase/CTlib.pm
AutoSplitting ../blib/lib/Sybase/CTlib.pm (../blib/lib/auto/Sybase/CTlib)
/usr/local/bin/perl -I/usr/local/lib/perl5/5.6.1/sun4-solaris
-I/usr/local/lib/perl5/5.6.1 /usr/local/lib/perl5/5.6.1/ExtUtils/xsubpp
-prototypes -typemap /usr/local/lib/perl5/5.6.1/ExtUtils/typemap CTlib.xs >
CTlib.xsc && mv CTlib.xsc CTlib.c
gcc -c -I/adcom/ase-12.5.x/OCS-12_5/include -fno-strict-aliasing
-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O   -DVERSION=\"2.18\"
-DXS_VERSION=\"2.18\" -fPIC -I/usr/local/lib/perl5/5.6.1/sun4-solaris/CORE
-DCTLIBVS=100 -DSYBPLVER='"2.18"' -DDO_TIE -DNOBLK CTlib.c
Running Mkbootstrap for Sybase::CTlib ()
chmod 644 CTlib.bs
rm -f ../blib/arch/auto/Sybase/CTlib/CTlib.so
LD_RUN_PATH="/adcom/ase-12.5.x/OCS-12_5/lib:/usr/lib" gcc
-L/adcom/ase-12.5.x/OCS-12_5/lib -G CTlib.o  -o
.../blib/arch/auto/Sybase/CTlib/CTlib.so   -L/adcom/ase-12.5.x/OCS-12_5/lib
-lct
-lcs -ltcl -lcomn -lintl -lcs -ltcl -lcomn -lintl -lm
chmod 755 ../blib/arch/auto/Sybase/CTlib/CTlib.so
cp CTlib.bs ../blib/arch/auto/Sybase/CTlib/CTlib.bs
chmod 644 ../blib/arch/auto/Sybase/CTlib/CTlib.bs
Manifying ../blib/man3/Sybase::CTlib.3
gmake[1]: Leaving directory `/tmp/sybperl-2.18/CTlib'
gmake[1]: Entering directory `/tmp/sybperl-2.18/DBlib'
cp DBlib.pm ../blib/lib/Sybase/DBlib.pm
AutoSplitting ../blib/lib/Sybase/DBlib.pm (../blib/lib/auto/Sybase/DBlib)
/usr/local/bin/perl -I/usr/local/lib/perl5/5.6.1/sun4-solaris
-I/usr/local/lib/perl5/5.6.1 /usr/local/lib/perl5/5.6.1/ExtUtils/xsubpp
-prototypes -typemap /usr/local/lib/perl5/5.6.1/ExtUtils/typemap DBlib.xs >
DBlib.xsc && mv DBlib.xsc DBlib.c
gcc -c -I/adcom/ase-12.5.x/OCS-12_5/include -fno-strict-aliasing
-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O   -DVERSION=\"2.18\"
-DXS_VERSION=\"2.18\" -fPIC -I/usr/local/lib/perl5/5.6.1/sun4-solaris/CORE
-DDBLIBVS=1000 -DSYBPLVER='"2.18"' -DDO_TIE -DNOBLK DBlib.c
Running Mkbootstrap for Sybase::DBlib ()
chmod 644 DBlib.bs
rm -f ../blib/arch/auto/Sybase/DBlib/DBlib.so
LD_RUN_PATH="/adcom/ase-12.5.x/OCS-12_5/lib:/usr/lib" gcc
-L/adcom/ase-12.5.x/OCS-12_5/lib -G DBlib.o  -o
.../blib/arch/auto/Sybase/DBlib/DBlib.so   -L/adcom/ase-12.5.x/OCS-12_5/lib
-lsybdb -lcs -ltcl -lcomn -lintl -lm
chmod 755 ../blib/arch/auto/Sybase/DBlib/DBlib.so
cp DBlib.bs ../blib/arch/auto/Sybase/DBlib/DBlib.bs
chmod 644 ../blib/arch/auto/Sybase/DBlib/DBlib.bs
Manifying ../blib/man3/Sybase::DBlib.3
gmake[1]: Leaving directory `/tmp/sybperl-2.18/DBlib'
gmake[1]: Entering directory `/tmp/sybperl-2.18/Sybperl'
cp Sybperl.pm ../blib/lib/Sybase/Sybperl.pm
AutoSplitting ../blib/lib/Sybase/Sybperl.pm
(../blib/lib/auto/Sybase/Sybperl)
Manifying ../blib/man3/Sybase::Sybperl.3
gmake[1]: Leaving directory `/tmp/sybperl-2.18/Sybperl'
 Manifying blib/man3/sybperl.3



This message and any attachments (the "message") is
intended solely for the addressees and is confidential. 
If you receive this message in error, please delete it and 
immediately notify the sender. Any use not in accord with 
its purpose, any dissemination or disclosure, either whole 
or partial, is prohibited except formal approval. The internet
can not guarantee the integrity of this message. 
BNP PARIBAS (and its subsidiaries) shall (will) not 
therefore be liable for the message if modified. 

                ---------------------------------------------

Ce message et toutes les pieces jointes (ci-apres le 
"message") sont etablis a l'intention exclusive de ses 
destinataires et sont confidentiels. Si vous recevez ce 
message par erreur, merci de le detruire et d'en avertir 
immediatement l'expediteur. Toute utilisation de ce 
message non conforme a sa destination, toute diffusion 
ou toute publication, totale ou partielle, est interdite, sauf 
autorisation expresse. L'internet ne permettant pas 
d'assurer l'integrite de ce message, BNP PARIBAS (et ses
filiales) decline(nt) toute responsabilite au titre de ce 
message, dans l'hypothese ou il aurait ete modifie.